GearOrb
Magnetic Slingshot Bands with Leather Pouch | Heavy-Duty 4-Strand Replacement
Magnetic Slingshot Bands with Leather Pouch | Heavy-Duty 4-Strand Replacement
Couldn't load pickup availability
High-Tension Power & Magnetic Core
Embedded Neodymium Magnet: Centered with a high-strength magnetic pocket that instantly snaps steel balls in place. Eliminates manual positioning and keeps ammo securely seated during full draw.
Quad-Strand Kinetic Design: Constructed with four durable natural latex tube bands. Engineered to deliver high muzzle velocity, flatter trajectories, and balanced resistance.
Reinforced Microfiber Leather: The center pouch uses tear-resistant, non-slip composite leather with hand-stitched reinforcement cord to prevent tear-out during repetitive draws.
Seamless Compatibility: Custom tuned to drop straight into the pulley guides and clamp blocks of the GearOrb Auto-Reload Slingshot.
Dimensions & Materials
| Total Length | 35 cm / 13.8 in |
| Pouch Length | 4 cm / 1.6 in |
| Outer Tube Diameter | 0.36 cm / 0.14 in |
| Inner Tube Diameter | 0.16 cm / 0.06 in |
| Unit Net Weight | 7.5g / 0.3 oz |
| Band Material | High-grade natural elastic latex tubes |
| Pouch Material | Wear-resistant leather + embedded strong magnet |
| Ammo Compatibility | Optimized for 8mm and 9mm steel balls |
Rubber bands are consumable items. To extend band life, store extra sets away from direct sunlight and heat. Replacing your band set every few hundred shots maintains consistent shot groups and high shooting safety.
Select Your Bundle
Includes 3× high-tension 4-strand magnetic replacement band sets. Essential basic backup for casual target plinking.
Includes 5× high-tension magnetic band sets. The best value choice to keep in your gear bag for all-day outdoor shooting sessions.
Includes 10× high-tension magnetic band sets. Maximum volume savings for dedicated competitors and high-frequency enthusiasts.
Quick Replacement & Band Care
Quick Replacement Steps:
- Unscrew the clamp caps on both sides of the slingshot fork arm.
- Remove the old band and guide the new 4-strand set through the fork pulleys.
- Seat the band stoppers firmly into the slots, verify the magnetic pouch faces upward toward the feed port, and hand-tighten the retaining caps.
Care Instructions: Avoid contact with solvents, sharp burrs, or prolonged dampness. Inspect bands for minor tears or cracking before each session.
Responsible Use & Wildlife Pledge
All GearOrb replacement parts and elastic bands are strictly intended for safe target practice, outdoor plinking, and sports training. We condemn and prohibit the use of our equipment for hunting, hurting, or harassing birds and wildlife. Always inspect gear safety and shoot toward clear, designated targets with proper backstops.
Share
